Sunday, 7 December 2014

Shampooing, Conditioning and Blow drying techniques.

Shampooing, Conditioning and Blow drying techniques.

For this lesson, we learnt how to shampoo and condition the hair correctly and also learnt how blow dry the hair straight.
 
 
Products used:
-Shampoo and conditioner
-Heat defence spray
-Vitapoint
 
Tools used:
-Brushes
-Straighteners
-Hairdryer
 
Health and Safety:

-Ensure the work space is clean and tidy, with no trailing wires.
-Ensure all electrical equipment is in good working order.
-Be careful when using heated appliance on the client.
 
 
Step by step: (Washing)
-Comb the hair through beforehand to avoid tangling when washing.
-Put two disposable towels around the models shoulders to protect clothing from getting wet.
-Ask the model to sit in the chair correctly, making sure all hair is in the basin.
-Test the water on your skin to make sure it is the correct heat. (Not too hot or cold) Ask the model if the temperature is okay.
-Begin to wet the whole of the head with the water, making sure the whole head is covered.
-Cup your hand and use it as a guard to protect the face from becoming wet. Push the water away from the face.
-Put a small amount of shampoo into the palm of your hand and begin to lather into the head and hair paying attention to the scalp and roots.
-Ensure that you use your fingers to massage the head and not your nails as this could scratch the model and irritate their scalp.
-Rinse away the product using your fingers.
-Repeat these steps if the hair is particularly dirty.
-For conditioning, add a small amount of product to the palm.
-Massage the conditioner into the hair, using small circular movements, pay particular attention to occipital and sides.
-Rinse the hair out using the same technique when rinsing the shampoo. Be sure that no bubbles are left in the hair and make sure the nape has been rinsed.
-Squeeze any excess water out of the hair before allowing your model to sit up.
-Wrap a disposable towel around the head and ask the model to hold it while she attends her seat.
 
Step by step: Hair drying
-Start by patting the hair as dry as possible with the towel. Avoid rubbing the hair together as this may tangle the hair.
-Part the hair into sections, clip the bulk of the hair to the top of the head.
-Start from the bottom, taking small sections.
-Grab a section, place a Denman brush underneath the hair.
-Angle the hairdryer downwards on top of the hair, and smooth the hair as you dry to keep the cuticles smooth.
-Use this technique over the whole head.
-Once dry, use a small amount of heat defence spray and straighten the hair by taking small sections.
-Add a pea size amount of vitapoint if needed to smooth the hair.
 
 
Model: Rania Ali
Fig. 1

Model: Rania Ali
Fig. 2

Model: Rania Ali
Fig. 3

Model: Rania Ali
Fig. 4
 
Evaluation
 
I really enjoyed this lesson, particularly because something that I thought would be so simple, actually requires a lot of technique and hand co-ordination. I really enjoyed shampooing and conditioning the hair and think that I did it quite well. I regularly asked my model if she was comfortable with what I was doing and was pleased that she was happy with my treatment.
 
As my models hair was originally quite dirty, I shampooed the hair twice. This is something that I recognised myself and I went with my initiative instead of embarrassing the model and discussing it with her. It is important that the client feels at ease when completing a task like this so I ensured I acted in a professional manor.
 
Once I successfully shampooed and conditioned the hair, I took the model back to her seat (Fig. 1) and began to comb the hair into sections to dry. For this part of the treatment, we were asked to work in pairs to dry the hair. Rather than deciding to separate the hair in two and concentrate on a side each, my partner and I agreed to work together to complete the look to the best of our ability, so we each had a hair dryer and worked on different areas together.
 
Emma showed us a variety of techniques when drying using different brushes. I experimented with the Denman brush, which I found I preferred and also experimented with the round brushes that have a  metal inner part. The technique I used with the Denman included putting the brush under the hair and combing downwards as you blow dry. I found this technique the simplest because it wasn't so fiddly but I did try the other techniques so that I could compare my results. The technique used with the round brush included rolling the brush upwards. I found this quite tricky and was also aware that if I rolled it too high the brush would get stuck in the hair. Although I found this technique more time consuming, I did think that having the metal inner part helped to dry the hair much quicker than using a regular brush.
 
 I was really pleased with how the finished blow dry came out however my model did have a natural kink in her hair that was prominent in the finished look. (Fig. 2) Although I feel that I tried my best to avoid this from happening by drying the hair straight, I think next time I could worth with the heat to fix this. To ensure my model left happy, I used straighteners to finish the look.
 
Overall, I'm really happy with the finished look and think my models hair looked healthy and shiny. (Fig. 3 & Fig. 4) I enjoyed working in a pair as it enabled me to work quicker and also to work both individually and as a team to create the finished look. I was confident that my model was happy with the treatment and left my seat feeling pleased.


Smokey Eyes

Smokey Eyes

In this lesson, we learnt how to create a classic Smokey eye.
 
There are many different variations of the Smokey eye as well as different techniques that are used to achieve the desired look. A Smokey eye does not necessarily have to be black. Softer versions can be created using light brown eye shadows as well as other colours. Smokey eyes can also be achieved by using a smoulder pencil. (I love this Mac one) Blending techniques are one of the most important things to consider when creating a Smokey eye.
 
Model: Kasia
Makeup by: Branka Vorkapic

This is a photograph from Branka's demonstration of the Smokey eye. I really like this sultry look and think it looks beautiful on the model Kasia. One of the key things I took from this demonstration was that you had to work fast and neat with the blacktrack otherwise it could prevent the desired look from being achieved.
 
 
Products used:
-MAC blacktrack gel eyeliner
-Naked 2 palette
-Kryolan eye shadow palette
-Derma colour concealer palette
-MAC vanilla pigment
-MAC concealer palette
-Kryolan Ultra foundations
-MAC translucent powder
-MAC reflex gold glitter
-MAC shine mixing medium
 
Health and Safety
-Ensure the workspace is clean and tidy
-Ensure the kit and brushes are clean
-Ensure the model is at the correct height
-Ensure the glitter is of a cosmetic grade
 
 
Step by Step
-Cleanse, tone and moisturise the model.
-Apply black track to the eyelid, no higher than the crease, ensure an even application is applied and lift the brow to blend the product and soften the initial line.
-Press black eye shadow from the Naked 2 palette on top of the gel liner into the crease and blend out using a blending brush. 
-Apply beige eye shadow from the Kryolan palette under the brows and blend downwards.
-Create a cappuccino colour using the Kryolan palette and blend above the crease of the eye.
-Create a coffee brown colour using the Kryolan palette and blend onto the crease into the cappuccino colour and black. This will soften the eye shadow and stop the black eye shadow from looking so harsh.
-Apply black track onto the water line using a small angled brush. Set it with black eye shadow if the models eye is sticking or uncomfortable.
-Apply MAC concealer where needed, in particular look at the eye area. Get the model to look down and look in the mirror for any shadows that need concealing. (For my model, I used the peach tone to conceal the grey under her eyes)
-Match the models foundation using the Kryolan Ultra foundations and apply evenly to the skin, making sure to feather it on leaving no streaks.
-Use the derma colour palette to create a colour that matches the natural hair colour. Using a flat brush, apply the colour to the eyebrows and use a spooley to blend in.
-Apply an eye shadow from the Kryolan eye shadow palette that matched the derma colour to the eyebrows. (This sets them)
-Use a light concealer under the eyebrows to define them, then use a natural colour on top (I used foxy from the Naked 2 palette)
-Contour the face under the cheek bone, side of the head and chin using a liquid foundation two shades darker than the foundation.
-Set the makeup using MAC translucent powder
-Using minimal product, apply black shadow under the eye lid, joining it from the outer corner to the middle corner. Make sure this is soft and that the black eye shadow does not drop on the clients face.
-Take the MAC vanilla pigment and apply it under the brow and in the inner corner of the eye
-Create a crème blush using the Kryolan lip palette, use your ring finger to apply it to the apples of the cheeks.
-Add more vanilla pigment to the cheek bone.
-Create a neutral lip colour using the Kryolan lip palette and apply it to the lips.
-Blot any excess lipstick onto a tissue.



Model: Chloe
Fig.1. Facing problems

Model: Chloe
Fig. 2. Overcoming problems


Evaluation:
 
What went well:
I really enjoyed creating this look. I was happy with the foundation base and even more happier with the eyebrows. I have never used derma colour for eyebrows before and thought that it worked extremely well. I think that one of the most valuable things I have learnt so far on this course, is how versatile makeup products can be. In this look especially, I used a concealer palette for the eyebrows, and lipsticks to create a blush which is something that admittedly, I would have never thought of before. I think that I used the right colour for the models natural hair and skin colour and was very pleased with the outcome. I was pleased with the overall Smokey eye I created but I think that it is something that does take a lot of practise to get right. I think the shape of the makeup looked good and I was pleased at how easy I found it to apply the gel eyeliner to the waterline without causing any discomfort to the model.
 
Problems I faced/overcome:
During this look, there were some problems that I was faced with. For starters, the MAC blacktrack gel eyeliner is very drying so it has to be applied quickly. As I was trying to get an even application, the product dried and I found it difficult to blend the edges. (Fig.1) To fix this, I applied a coffee colour on the edges with a blending blush and blended to try and soften it. It worked well and after I had applied the other eye shadows I think it turned out okay although I did have a dark patch in the corner of the eye that needed to be corrected. (Fig. 2) One of the other problems I faced when creating this makeup was that for this look, I had to work with a partner who worked on the other side of the face. In the makeup industry it is common that you would work with other people so I had to make sure that both sides of the face matched which was quite difficult to do when I was trying to concentrate on my side.

Overall, I was happy with the way this look turned out and now know what I need to do to improve for next time. I really enjoyed using different products for this look and thought that blacktrack really worked well as a base for the makeup.

 
 
  Look Change:

For a more glamorous evening look, Branka added to the look previously created. She told us that often when working in the industry, you would need to change the makeup quickly to make it look different and this is something that we could do to improvise quickly.

Model: Kasia
Makeup by: Branka Vorkapic
 
Step by Step
-Mix a tiny amount of MAC shine mixing medium with MAC reflex gold glitter. (Be sure the glitter is of a cosmetic grade)
-Apply the glitter to the lid using an eye shadow blending brush and use a dabbing motion to press on the glitter.
-Create a plum coloured lipstick using the Kryolan lip palette and apply to the models lips.
-Blot an excess lipstick onto a tissue.


Model: Chloe
Makeup Artist for right side: Bjorn Daniels
 
Model: Chloe
Fig. 3.
 
Evaluation:
 
 I really loved this look change and enjoyed using the glitter on the eyelids. Although initially I was pleased with the glitter application, after a minute or so the black eye shadow began to crease. This is because I used too much mixing medium so next time I recreate this look I will use a lot less when mixing with the glitter. I wasn't entirely happy with my lip application as I felt that a stronger colour with a deeper purple undertone in it would have looked better. I wasn't entirely happy with the lip shape either as I accidently went out the natural lip line on the bottom left (fig.3.) so this is something that I know I need to practise. Overall, I really enjoyed taking the original makeup and making it stronger and will be purchasing some mixing medium in the near future to practise glitter application.
 
 
 
 
 
 
 
 

Carmen Roller Set

Carmen Rollers Set

For this lesson, we learnt how to create a brick set in the hair using Carmen rollers. The intention of a brick set is to create volume and also to make sure that there are no gaps/lines in the hair when it is dressed out.
 
 
Demonstration by Neil Rothwell
 
 
Tools:
-Carmen Rollers
-Brushes
-Setting spray
 
Health and Safety:
-Ensure the workspace is clean and tidy
-Ensure there are no trailing wires from electrical products
-Ensure to be careful when using heated appliances near the models skin
-Ensure all equipment, including brushes, is clean.
 
Step by Step:
-Firstly, brush the hair using a paddle brush to make sure there are no tangles or knots.
-Starting from the front of the head, take a section from the front using the end of the tail comb, no wider than the red sized roller.
- Angle the hair 90 degrees and spritz with water and then setting lotion.
-Place the red roller (biggest) underneath the hair and begin rolling  the hair underneath towards the head, tucking any stray hairs under with the tail comb, until the roller meets the head.
-Secure to the head with a hair pin.
-Continue this technique on the whole head making sure to position the rollers like bricks, and making sure to follow the natural curve of the head.
-Start using the red rollers from the top, then the second smallest size and so on once you have run out of the biggest ones.
-Remember to have good tension on the rollers and angle the hair 90 degrees from the head.
-Leave the rollers to cool.
-Dress the hair out as desired.
 
 
 
Fig. 1
Fig. 2
 
 
Evaluation
 
This was my first lesson using Carmen rollers and I really enjoyed it. I think that the speed I put the rollers in was really good and I didn't spend too long a time putting them in. I also think that I successfully managed to put all the loose hairs in the rollers by using the end of the tail comb to guide the hair onto the rollers so I was really happy with that. After taking my rollers out I was pleased to have no hooks which is something I know can happen if the rollers aren't put in correctly.
 
There are quite a few things that I wasn't happy about with this set and things that I know I can improve on to make it better. Firstly, in some areas I used too much hair so once I had secured the roller to the head, some of the hair began to fall off the sides. (Fig.1) In future, to prevent this I will measure the length of the roller against the section to ensure it all fits on the roller.
 
I think that my tension is something that I need to improve on. By tension, I mean the angle and how tight I roll the hair. The hair should have been rolled at a 90 degree angle but as you can see from the photograph ( Fig. 2) my rollers have been brought up too high and too low in some areas. This is something that I can definitely improve on and will improve the overall finished look when dressing out the hair. The other thing that I struggled with was the brick set. I think that I got myself a bit confused even though I kept referring back to the demonstration and as you can see by the photograph, (Fig. 1) my rollers are in different directions on each side. Also, at the back of the head (Fig. 2) I lost my brick formation slightly, leaving quite a large gap in the middle. To improve this next time, I would make sure to follow the natural curve of the head and also start my rollers from the middle working outwards rather than side to side to create a neater brick set.
 
Overall, I was happy with how this lesson went for my first attempt at heated rollers but can recognise what went wrong and what I need to do to improve this set.




Eyeliner

Eyeliner

In this lesson we learnt how to apply eyeliner and also looked at the different types of eyeliner that are available. Eyeliners available include kohl, gel, liquid, pencil and cake.
 
Branka explained the pros and cons of a variety of different eyeliners and also showed us different brushes that worked well with the products. Branka created a simple eyeliner and later showed us a creative twist. We were then told to re-create the classic eyeliner look as well as adapting it for a fun, catwalk twist.


Classic Liner
 
Model: Olivia Alete
Makeup by: Branka Vorkapic
 
The above image shows model Olivia with a classic eyeliner. This look was created by lecturer Branka and shows a simple eyeliner with a small flick. What I really liked about Branka's technique was that it was fast and created a perfect flick. I think that when learning to do eyeliner, the faster you apply it, the easier it is because spending too much time on it can make room for mistakes. I really like the subtle flick on this eyeliner which Branka created by lifting the brush away as she flicked.



Health and Safety
-Ensure the model is at the correct height
-Ensure all makeup brushes and kit are clean
-Ensure hands are clean and sanitized
-Use a spatula to deposit products, no cross contamination



Model: Bjorn Daniels
Fig. 1


Model: Bjorn Daniels
Fig. 2


 
Evaluation

What I did:
The above images show my attempt at a classic eyeliner. I used two different eyeliner products, one for each side in order to see which one I preferred. For Fig. 1 I used Screenface cake liner which is water based and activated by spritzing water onto the product to activate it. I started by using an angle brush and loading enough product onto it without overloading. (Overloading the brush would create a much thicker line and may prevent an even finish) I asked my model to close her eyes and lifted the brow to make it easier for me to have control of where I was going to apply the liner. I started applying the liner to the centre of the eye and asked my model to look away in order for me to line the inner corner of the eye. I then looked at the natural shape of the eye to determine where to flick the liner and lifted the brush away as I flicked the liner away from the eye. For Fig. 2 I followed the same technique but used an acrylic brush instead to create a thinner line and used Mac Blacktrack which is a gel eyeliner instead of cake.
 
What went well:
I really enjoyed using the cake eye liner because I think it gave a strong finish. If you compare the two photographs, the eyeliner on Fig. 1 is much stronger than Fig. 2. I'm pleased with the overall application of the liner and think that I managed to get the line on each eye rather straight with no wiggly lines. I think that both attempts have their strengths. The liner on Fig. 2 using the Blacktrack is all one thickness which I think can be quite hard to achieve.
 
What I could improve on:
Although the Mac Blacktrack is a very versatile product, I found it difficult to use and am not sure it is a preferred product of mine to use for eyeliner. The product itself is very drying which means you have to work with it quickly and as you can see from the right photograph, the intensity is not at strong as the cake liner. I think the main thing that I need to work on when it comes to eyeliner is the flick. In Fig. 1, when it came to doing the flick, I found lifting my brush away quite tricky and had to go over it again with more product. This created a solid flick rather than the softer flick intended like in Brankas tutorial. I was also unhappy with the flick in Fig. 2 because I did not bring it up high enough and instead brought it into the crease of the eye.
 
 
Catwalk Eyeliner
 

Model: Olivia Alete
Makeup by: Branka Vorkapic
 
The above image is Branka's version of eyeliner with a catwalk twist. What I particularly love about this look is the use of colour on the bottom of the eyeliner. It really compliments the lips and makes the eyeliner stand out.
 

Model: Bjorn Daniels

 
The above image shows my attempt at the catwalk liner. As you can see I had a very unsuccessful trial. Branka gave us a realistic but short amount of time to add foundation, eyeliner and lipstick to half the face before we had to swap over and unfortunately I did not have enough time to finish. I found colour matching Bjorn's skin with foundation rather difficult and once I had achieved her correct skin colour, I barely had any time left to add the eyeliner which made me panic and completely mess up the look I had in mind. I ended up just starting the beginning of a design above her eye which looked odd on its own. I left the lesson feeling very disheartened at my efforts but determined to work on my colour matching skills and also to re-create the look intended for the lesson.
 
 


Creating a wet roller set with a brick setting.

In one of the first hair lesson with Emma, we learnt how to create a brick set in the hair using rollers.
 
Rollers are used in order to obtain a longer lasting hairstyle, whether to create curls or to be used as a mould for the hair to be shaped into. A brick set is used to create volume and also prevents any gaps or lines from being formed in the hair.

Emma Croombs demonstration.
 
Tools:
-Rollers
-Setting spray
-Water spray
-Pins and grips
-Dolly head
-Brushes
-Hairdryer
-Hairdryer bonnet

 Health and Safety
-Ensure the work space is clean and tidy.
-Ensure all equipment is clean.
-Ensure there are no trailing wires from the electrical items.
-Ensure all electrical items are in good working order.
-Place all equipment on a clean towel.
 
Step by step:
-Firstly, brush all the hair back using a paddle brush, ensure any tangles or knots are smoothed out.
-Starting from the front of the head, take a section from the front using the end of the tail comb, no wider than the size of the roller.
- Angle the hair 90 degrees and spritz with water and then setting lotion.
-Place the roller underneath the hair and begin rolling  the hair underneath towards the head until the roller meets the head.
-Secure with a hair pin.
-Continue this technique on the whole head making sure to stagger the rollers like bricks to prevent any gaps when the style is dressed out.
-Remember to have good tension on the rollers and angle the hair 90 degrees from the head.
-Once all the rollers have been put in, attach a hairdryer to a hairdryer bonnet and place it on the dolls head to warm the rollers and dry the hair.
-Once the rollers have cooled, take them out and dress out the hair as desired.
 
Fig. 1.
 
Fig. 2.

 
 
Fig. 3. Finished style.
 

 

Evaluation:

 I really enjoyed creating this brick set and also enjoyed using  the metal rollers as I had never used them before. Before, I have only ever used heated Carmen rollers, so wetting the hair and drying it on metal rollers was a new experience for me. The differenced between metal rollers and heated rollers is just that the metal rollers is a more old fashioned technique, however I would say that after trying this technique, the ready heated ones are more sufficient and I find that the curl lasted longer because they can reach a certain degree of heat quickly.

As you can see from my photographs, although I found the actual rolling of the rollers easy, my bricking pattern was not the standard it could have been. I think that for this particular set, I had good tension and angled the rollers correctly. My set did not have any overhanging hair so I was pleased that I took the correct amount of hair for each roller. I think where I went wrong was that I did not follow the shape of the head when creating my brick set so lost my formation. In fig.1. you can see that the rollers are a bit wonky on each side and not as straight as they should be so this would be something I would definitely work on in future. In fig. 2. you can see that my set slants diagonally, this is due to not sectioning the hair properly so in future I will make sure to take cleaner sections.

I was happy with how my finished look turned out because I think that I successfully created volume in the hair. I teased to the roots of the hair using a teasing brush to add volume and although I think I could have done more backcombing, overall I was pleased with the outcome. I really like the shape that I created from the rollers although one side did appear smoother than the other. (Fig.3) To fix this, next time I would add a smoothing product such as Vitapoint in order to create a smoother finish. Overall, I was happy with how this lesson went and the look I created but I do realise the mistakes I made and how I could improve this look and take it further. Experimenting with different tools was really enjoyable and I look forward to creating more styles in the future.

Highlighting and Contouring

Highlighting and Contouring

For this lesson, Branka taught us how to highlight and contour the face.

We looked at a variety of different products that can be used as a highlighter such as MAC vanilla pigment, Revlon highlighter photo ready skin, Ben Nye luminar looks powders and Revlon highlighter photo ready skin in colours 200 pink light and 100 bare light.

We looked at two different approaches to highlighting and contouring. Firstly, a softer, natural look and then secondly a heavier look.



Natural Look

Model: Rowan Lennard
Makeup by: Branka Vorkapic

This is Branka's demonstration showing a natural highlight and contour. As you can see the look is very subtle and portrays a healthy, natural looking glow.


Health and Safety:
-Ensure all brushes are clean
-Ensure all kit is clean
-Ensure work station is clean and tidy
-Ensure model is at the correct height

Products used
-Le Maquillage foundation palette
-Makeup mixer
-MAC concealer palette
-MAC Translucent powder
-Revlon highlighter
-Kryolan blush palette

Step by step
-Cleanse, tone and moisturize the models skin.
-Ask the model to look down and check in the mirror for any dark areas under the eyes, conceal if needed using the MAC concealer palette.
-Conceal any additional areas that need it, be careful to not use too much product as this is a light look.
-Mix 3/4 makeup mix to 1/4 foundation from the Le Maquillage foundation palette. (If makeup mixer is not available, use moisturiser)
-Use the dark powder from the Kryolan blush palette to contour the face in areas that need it. (under the cheekbone, lightly on the jawbone)
- Feather the foundation onto the skin using a foundation brush, use the warmth of your fingers to correct and streaky makeup to ensure a clean finish.
-Take the Revlon highlighter and use your ring finger to apply the highlighter.
-Apple the highlight to the cheekbones, under the brow on the brow bone, slightly on the length of the nose, the top of the lip, and the chin.
-Set with translucent powder.


Model: Rania Ali

 
Evaluation
 
Personally, I felt that this lesson was not very successful for me however I did learn a lot from my mistakes. The positives of the look I achieved was that I think I managed to match the models skin tone well. This is something that I do not have great knowledge on yet but I know that with practise and time, I will improve and it won't take me as long to match foundations to different skin tones. A mistake that I made when creating this look was failing to recognise the models skin type. Although we were asked to use MAC face and body foundation for this natural look, this type of foundation is not great for my models skin as hers is quite oily and the foundation is water based. MAC face and body is a liquid foundation that creates a sheer, dewy finish. Although you can make it matte with powder, I feel that the product did not work well on the skin and if you look closely, especially around the nose area, you can see that the foundation has begun lifting off the face.
 
Although I followed Branka's technique when contouring the face, I think that I was not strong enough with the colour as it is barely noticeable on my model. I was happy with some of the highlighting and think that the photograph shows the areas that I highlighted well. Some of the highlight I created has become lost in the shine on the face so overall, I was not happy with the finished outcome. In future, when dealing with a client with oily skin, I would select a matte foundation for the skin and also use a primer to prep the skin before hand.
 
 
Further Development
 
As I wasn't entirely happy with my finished natural look, I decided to revisit it later.
I created this natural highlight using the same techniques and products as before but this time, I analysed the models skin type before choosing a foundation. This model had a dry/normal skin type so I hydrated the areas that needed attention with a extra moisturiser and used MAC face and body foundation on her skin. I built the product up and it really suited her skin which I was pleased about. I lightly contoured the face using a darker powder from the Ben Nye palette and applied a powder highlight (Kryolan) to the bridge of the nose, the upper lip, the brow bone and C section. I really love the Kryolan highlighter because it adds a subtle highlight that looks natural and healthy. As it is powder, it is easily buildable and light so I had better control over how much to apply. Overall, I was happy that I re-visited this technique and thought the models skin looked beautiful.
 
 
Model: Charlotte Searle
 


Heavy look Highlight
 
 
Model: Rowan Lennard
Makeup by: Branka Vorkapic
 

Products used
-Kryolan ultra foundations
-Translucent powder
-MAC vanilla pigment
-Kryolan concealer palette
-Kryolan blush palette

Step by step
-Cleanse, tone and moisturise the skin.
-Conceal areas that need attention using a concealer brush and D32 from the derma colour palette.
-Apply a medium/full coverage foundation (Le Maquillage palette) to the face using a foundation brush. Feather the foundation on lightly and use the warmth of your thumb to get rid of any streaks.
-Fill in the eyebrows using the Kryolan concealer palette. Choose a colour that matches the models natural hair colour. Use a spooley to blend the colour into the brow and set with an eye shadow that matches the colour used.
-For the contour, using the Le Maquillage palette, chose a colour that is three shades darker than the foundation used.
-Ensure that the colour chosen has cool tones as warm will look bronzed.
-Add foundation to the contour colour and apply to the areas that need it. (under the cheekbone, lightly on the jawbone, sides of the face, down the sides of the nose.)
-Buff the contour colour into the skin using a buffer brush. (The Sigma angled Kabuki brush works well here)
-Set the makeup with MAC translucent powder and a large powder brush.
-Create a highlighting colour by choosing a shade three shades lighter than the foundation colour used. Mix it with some foundation.
-Apply the highlight to the areas that need it using a large concealer brush. (Bridge of the nose, brow bone, temple, cheekbone)
-Enhance the highlight with MAC vanilla pigment. Use your ring finger to apply. Enhance the brow bone and C section.




               


Evaluation: 

I found the heavy look much more challenging than the natural look. Although Branka told us to go three shades darker than the foundation, at first I felt that the colour was too subtle so added a darker tone. It was important to not use a warm toned colour for the contour because it would make the face look bronzed. I used the Kryolan concealer palette and chose a brown with a grey undertone but looking at the photography it still looks very warm. I was happy with the contouring of the side of the head and under the neck but I think I brought the contour under the cheek bones too far down. Next time, I wouldn't extend it as far as I did as I think it has the opposite effect to contouring the face, losing the definition. 

I was happy with the highlight on this look but think I could have made the look more defined as in Brankas tutorial. I really love using the MAC vanilla pigment and think it works well to enhance the highlight created. It is easy to apply and sits on the face really nicely. I do think however, it should be used minimally as a small amount of product tends to go a long way. 

I found concealing difficult in this look, in the photograph you can just about see a redness around they eye which is the D32 concealer from the Kryolan palette. I had difficultly blending this in and think it was because I used too much product. Next time, I would use minimal product on the brush and build it as needed. 
 
Overall, I was pleased with this look but think there are many aspects that I need to improve on. Highlighting and contouring is important to most makeup looks so I am eager to perfect my skills.















Foundations

Foundations
 
For our first Fashion lesson, we were taught about different foundations. We learnt about full, medium and light coverage foundations and experimented on each other to see the differences between them.

Our Lecturer Branka went through a number of popular brands of foundations, explaining the pros and cons of each and demonstrated the coverage on her hand, to show us the differences between them.
 
An example of a medium/full coverage foundation is MAC studio fix which is MACS most sold foundation. This particular type of foundation has a good coverage and is very buildable but there are also some negatives of the product. This foundation has a high alcohol content so it is very drying and can leave pigment on the face. As well as this, the product can cause spot breakout and it and Branka told us that it is a common product to cause allergy.
 
An example of a light/medium coverage foundation is MAC face and body. At the beginning of the lesson most of the class said they did not like MAC Face and Body but by the end, Branka had convinced us all that it is in fact, a great product that can be buildable. Some pros of MAC face and body are that it's waterproof, it can be thickened once the air has got to it and it can be mixed with moisturiser and used as a tanning product. A con to the product is that although you can build it up, it is quite sheer and may not be suitable for those who need a full coverage foundation.
 
 
Model: Millie Redrup
Makeup: Branka Vorkapic

For Branka's demonstration, she showed us how to build up MAC Face and Body by using a metal spatula to aggravate the product on the back of the hand. The heat from the hand warmed up the foundation and the air got inside it to thicken it up. She then applied the foundation to the left hand side of the face. For the right side of the face she used MAC studio fix to show us the difference between the two coverage's.
 
 
Products:
 -MAC face and body foundations
-MAC studio fix foundations
-Setting powder

Step by step:
-Cleanse, tone and moisturise the face.
-Match the models skin tone to the foundation, check against the skin and check in the mirror.
-Apply the foundation with a foundation brush, using the tip to feather it on lightly.
-Use the warmth of your fingers to warm up the product on the face to prevent streaks.
-Set the foundation using a translucent powder.




Model: Olivia








Evaluation
 
I really enjoyed this lesson because it taught me a lot about foundations and the different types of coverage. I used MAC face and body on the left hand side of my model and MAC studio fix on the right hand side. I was very surprised at the coverage of the face and body foundation as when you first deposit it onto your hand it is very runny but it really does thicken up once the air has got into it, as Branka demonstrated. I think that this particular foundation worked well on my model because her skin type was normal. It really blended into the skin well and I found the feathering technique with the foundation brush really effective.
 
On the right hand side of the face, I used MAC studio fix foundation. Firstly, I created the wrong shade and made it too dark so I added a yellow tone to the foundation because my model has yellow undertones, which achieved the correct colour. I used the same feathering technique when applying this foundation to the face and think that because I was able to build the face and body foundation up, the coverage of the studio fix nearly matched the left hand side. Although I didn't have any issues with the studio fix foundation, I'm not sure that it is a product I like. The product created good coverage and had a matte finish which I liked but I just think that out of the two, face and body worked better on my models skin. By the end of the lesson, I analysed my models face and the studio fix appeared to have moved even though I powdered it with translucent powder. The reason for this is that MAC studio fix contains alcohol, which dries out the foundation and leaves behind pigment.
 
Overall, I was really happy with how the foundation application turned out and I was thoroughly pleased with my colour matching technique.